openSUSE Leap 15.6 native package

sane-backends-autoconfig

USB Scanner Autoconfiguration

Packages / openSUSE Leap 15.6 / Hardware/Scanner / sane-backends-autoconfig

[Source: sane-backends]

Package: sane-backends-autoconfig (1.0.32-150400.15.2.1)

External Resources:

Homepage: [www.sane-project.org]

Similar packages:

[sane-backends]
SANE (Scanner Access Now Easy) Scanner Drivers
[sane-backends-32bit]
SANE (Scanner Access Now Easy) Scanner Drivers
[sane-backends-devel]
Development files for sane-backends
[sane-backends-devel-32bit]
Development files for sane-backends

USB Scanner Autoconfiguration

USB scanner autoconfiguration happens via udev. The file /etc/udev/rules.d/56-sane-backends-autoconfig.rules contains entries for those USB scanners where the USB IDs are known, which are supported by a free driver, where the support status is "complete" or "good", and which do not require firmware upload. When a USB scanner is connected and its USB IDs match to an entry in the 56-sane-backends-autoconfig.rules file, the matching scanner driver is activated (i.e. the driver line in /etc/sane.d/dll.conf is activated). It enables scanner drivers but never disables them. The reason is that enabled drivers do not hurt so that an automated disable would make it only overcomplicated because when more than one scanner uses the same driver, a complicated check would be needed to avoid that the driver is accidentally disabled when only one scanner was disconnected. If you do not like automated driver activation, do not install this package or remove it when it is already installed.

Other Packages Related to sane-backends-autoconfig:

dep: [sane-backends]
SANE (Scanner Access Now Easy) Scanner Drivers

enh: [sane-backends]
SANE (Scanner Access Now Easy) Scanner Drivers

Download sane-backends-autoconfig

Architecture	Package Size	Installed Size	Files
aarch64	30 KiB	68 KiB	[list of files]
ppc64le	30 KiB	68 KiB	[list of files]
s390x	30 KiB	68 KiB	[list of files]
x86_64	30 KiB	68 KiB	[list of files]

Package file paths (3)

Paths come from the repository package-file index for the observed builds. They describe archive/package associations, not every file that will exist on a running system after maintainer scripts, alternatives, generated state, diversions, or installation choices.

/etc/udev
/etc/udev/rules.d
/etc/udev/rules.d/56-sane-backends-autoconfig.rules

Field source: openSUSE Leap 15.6 OSS revision leap-15-6-oss-multiarch:ca2653101b9afba6656aea529109ba0c0f1ca1a92aa8614e7c887fda5264c230

Use this package

OpenFactory can boot this operating system in a browser VM, or start a build that includes the native package name from this record.

Try openSUSE Leap 15.6 in the browser Build an image that includes sane-backends-autoconfig

Versions, suites, and repositories

Each row is recorded package-index metadata for one version, architecture, suite, and repository. Names, URLs, and sizes are source-reported; a link is a potentially mutable retrieval location, not an OpenFactory redistribution claim or proof that OpenFactory retained the artifact bytes.

Version	Release	Architecture	Repository	Package size	Installed size	Publisher repository artifact
1.0.32-150400.15.2.1	leap-15.6 / oss	aarch64	openSUSE Leap 15.6 · OSS · multi-architecture	30 KiB	68 KiB	aarch64/sane-backends-autoconfig-1.0.32-150400.15.2.1.aarch64.rpm
1.0.32-150400.15.2.1	leap-15.6 / oss	ppc64le	openSUSE Leap 15.6 · OSS · multi-architecture	30 KiB	68 KiB	ppc64le/sane-backends-autoconfig-1.0.32-150400.15.2.1.ppc64le.rpm
1.0.32-150400.15.2.1	leap-15.6 / oss	s390x	openSUSE Leap 15.6 · OSS · multi-architecture	30 KiB	68 KiB	s390x/sane-backends-autoconfig-1.0.32-150400.15.2.1.s390x.rpm
1.0.32-150400.15.2.1	leap-15.6 / oss	x86_64	openSUSE Leap 15.6 · OSS · multi-architecture	30 KiB	68 KiB	x86_64/sane-backends-autoconfig-1.0.32-150400.15.2.1.x86_64.rpm

Field source: openSUSE Leap 15.6 OSS revision leap-15-6-oss-multiarch:ca2653101b9afba6656aea529109ba0c0f1ca1a92aa8614e7c887fda5264c230

Checksums and observation dates

For an APT source, signature verification authenticates the repository metadata chain and the Packages index containing this source-reported artifact digest. It does not certify package safety.

1.0.32-150400.15.2.1 / aarch64Observed Sep 1, 2026 to Sep 1, 2026

Verification status: Metadata observed; artifact bytes were not independently fetched or hashed by this catalog import. The digest below is source-reported.

Source-reported sha512: 7397ac523627e57257491dc1774482dafe17ac95df712beb9b6b96bbda3e2fa06c042330e8903970f422173c4594b4a413e25103422accd6062f39f07d9d413f

Field source: openSUSE Leap 15.6 OSS revision leap-15-6-oss-multiarch:ca2653101b9afba6656aea529109ba0c0f1ca1a92aa8614e7c887fda5264c230

1.0.32-150400.15.2.1 / ppc64leObserved Sep 1, 2026 to Sep 1, 2026

Verification status: Metadata observed; artifact bytes were not independently fetched or hashed by this catalog import. The digest below is source-reported.

Source-reported sha512: cec9dacd5c8520a40183ec1ecb198e79244cb1b11a49ffa4ccb8b631fc9f910e0b170b13cec204534342145811c7ab0d4919e37fb3f666a148f8fde726646f69

Field source: openSUSE Leap 15.6 OSS revision leap-15-6-oss-multiarch:ca2653101b9afba6656aea529109ba0c0f1ca1a92aa8614e7c887fda5264c230

1.0.32-150400.15.2.1 / s390xObserved Sep 1, 2026 to Sep 1, 2026

Verification status: Metadata observed; artifact bytes were not independently fetched or hashed by this catalog import. The digest below is source-reported.

Source-reported sha512: cc30743298236c110fdd9f51b169785e6f238c1e19bce5777249e10719ca6614a10cd1dcd4b0ee65f242e0e93cbfa718f9e4c712b193c9015ad9345c90dfb171

Field source: openSUSE Leap 15.6 OSS revision leap-15-6-oss-multiarch:ca2653101b9afba6656aea529109ba0c0f1ca1a92aa8614e7c887fda5264c230

1.0.32-150400.15.2.1 / x86_64Observed Sep 1, 2026 to Sep 1, 2026

Verification status: Metadata observed; artifact bytes were not independently fetched or hashed by this catalog import. The digest below is source-reported.

Source-reported sha512: b6af75f3ba6874f5c976753e5fede9f5139acdac9f2b31f9343f2c6711b06d7b93e066c1dc1439f27e36e064aa23d2f93774ef75adee75699c583958db5784e9

Field source: openSUSE Leap 15.6 OSS revision leap-15-6-oss-multiarch:ca2653101b9afba6656aea529109ba0c0f1ca1a92aa8614e7c887fda5264c230

Catalog record completeness

The completeness score measures metadata coverage, not software quality, security, compatibility, or suitability.

Summary and description: 25/25
Artifact path and source digest: 25/25
Dependency metadata: 15/15
Package-file index: 15/15
Homepage: 5/5
License text: 5/5
Source package or maintainer: 10/10

Recorded total: 100/100

Field source: openSUSE Leap 15.6 OSS revision leap-15-6-oss-multiarch:ca2653101b9afba6656aea529109ba0c0f1ca1a92aa8614e7c887fda5264c230. The cross-OS mapping is catalog-derived from the source-reported homepage; it does not establish authorship or publisher identity

Sources and provenance

Field-source links above resolve here. Each source entry names the metadata publisher, trust tier, exact snapshot revision, signature result, and observation time; catalog-derived mappings are labeled separately.

openSUSE Leap 15.6 OSSSep 1, 2026
Authoritative source; repository metadata signature verified, revision leap-15-6-oss-multiarch:ca2653101b9afba6656aea529109ba0c0f1ca1a92aa8614e7c887fda5264c230
Signature verification covers the configured repository metadata chain. It does not certify that the package is safe or suitable.
Repository-signature verification record
Signed object
https://download.opensuse.org/distribution/leap/15.6/repo/oss/repodata/repomd.xml
Signed-object SHA-256
ca2653101b9afba6656aea529109ba0c0f1ca1a92aa8614e7c887fda5264c230
Signer fingerprint
AD485664E901B867051AB15F35A2F86E29B700A4
Keyring revision
opensuse-project-signing-key.asc
SHA-256 b5745739ebfb95b25b8e810f9bcb847fe750ccda598bd85f02f0e974599a6d7e
Tool and policy
gpgv (GnuPG) 2.4.9
openfactory-software-catalog-signature-v1
Verification time
Sep 1, 2026
Signed Release → package-index hash linkage
Path: Not recorded
Expected SHA-256: Not recorded
Observed SHA-256: Not recorded
Result: match verified